收藏本站
Ultra-Efficient Charge Pumps for
Six White/RGB LEDs in 3mm x 3mm Thin QFN
Pin Description
PIN
MAX8647 MAX8648
NAME
FUNCTION
Supply Voltage Input. The input voltage range is 2.7V to 5.5V. Bypass IN to GND with a
1
1
IN
1μF ceramic capacitor as close as possible to the IC. IN is high impedance during
shutdown. Connect IN to the anodes of all the LEDs.
2
3
4
5
6
2
3
4
5
6
GND
C1P
C2P
C2N
C1N
Ground. Connect GND to system ground and the input bypass capacitor as close as
possible to the IC.
Transfer Capacitor 1 Positive Connection. Connect a 1μF ceramic capacitor from C1P
to C1N.
Transfer Capacitor 2 Positive Connection. Connect a 1μF ceramic capacitor from C2P
to C2N.
Transfer Capacitor 2 Negative Connection. Connect a 1μF ceramic capacitor from C2P
to C2N. An internal 10k Ω resistor pulls C2N to GND during shutdown.
Transfer Capacitor 1 Negative Connection. Connect a 1μF ceramic capacitor from C1P
to C1N.
Charge-Pump Negative Output. Connect a 1μF ceramic capacitor from NEG to GND. In
7
7
NEG
shutdown, an internal 10k Ω resistor pulls NEG to GND. Connect the exposed paddle to
NEG directly under the IC.
LED Current Regulators. Current flowing into LED_ is based on the internal registers.
Connect LED_ to the cathodes of the external LEDs. LED_ is high impedance during
8–13
8–13
LED6–LED1
shutdown. For the MAX8647, program any unused LED_ to off and LED_ can be
shorted to ground or left unconnected. For the MAX8648, short any unused LED_ to IN
prior to power-up to disable the corresponding current regulator.
14
15
16
—
—
—
SDA
SCL
V DD
I 2 C Data Input. Data is read on the rising edge of SCL.
I 2 C Clock Input. Data is read on the rising edge of SCL.
Logic-Input Supply Voltage. Connect to the supply voltage driving SDA and SCL.
Bypass V DD to GND with a 0.1μF ceramic capacitor.
Enable and Serial-Pulse Dimming Control. ENA controls LED1, LED2, and LED3. ENB
controls LED4 and LED5. ENC controls LED6. Drive EN_ logic-high to turn on the IC
—
14, 15, 16
ENC, ENB, ENA
and enable the corresponding LED_ at 24mA each. Drive an individual EN_ logic-low
for greater than 4ms to turn off the corresponding-current regulators or drive all three
EN_ low to place the IC in shutdown. See the Serial-Pulse Dimming Control (MAX8648)
section.
—
—
EP
Exposed Paddle. Connect to NEG.
_______________________________________________________________________________________
7
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
MAX8702ETP+ IC DRVR MOSFET DUAL 20-TQFN
MAX8790AETP+T IC LED DRVR WHITE BCKLGT 20-TQFN
MAX8790ETP+T IC LED DRVR WHITE BCKLGT 20-TQFN
MAX8791GTA+ IC MOSFET DRIVER 8-TQFN
MAX8811EEE+ IC DRVR DL PHASE HS 16-QSOP
MAX8821ETI+ IC LED DRVR WHITE BCKLGT 28-TQFN
MAX8822ETE+T IC LED DRVR WHITE BCKLGT 16-TQFN
MAX8830EWE+T IC LED DRVR WHITE BCKLGT 16-UCSP
相关代理商/技术参数
MAX8648ETE 制造商:MAXIM 功能描述:Pb Free
MAX8648ETE+ 功能描述:LED照明驱动器 Charge Pump for 6 White/RGB LEDs RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
MAX8648ETE+T 功能描述:LED照明驱动器 Charge Pump for 6 White/RGB LEDs RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
MAX8648EVKIT+ 制造商:Maxim Integrated Products 功能描述:MAX8648 EVAL KIT - Rail/Tube
MAX8649AEWE+T 功能描述:直流/直流开关调节器 1.8A Step-Down Regulator RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5
MAX8649BEWE+T 功能描述:直流/直流开关调节器 1.8A Step-Down Regulator RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5
MAX8649EVKIT+ 制造商:Maxim Integrated Products 功能描述:1.8A STEP-DOWN REGULATOR W/DIFFERENTIAL REMOTE SENSE IN 2MM - Boxed Product (Development Kits)
MAX8649EWE+ 制造商:Maxim Integrated Products 功能描述:1.8A STEP-DOWN REGULATOR W/DIFFEREN - Rail/Tube